How to correctly reconstitute Botox (botulinum toxin type A)?

select translation 👇

The dilution of botulinum toxin depends on the brand, purpose of use, and concentration.
Here are the general principles and dilution guidelines for popular products.

📌 Key Rules for Botox Dilution

    • ✔ Use sterile 0.9% saline solution (sodium chloride).
    • ✔ Do not shake the vial! – Gently inject the solution along the vial’s wall.
    • ✔ Store the reconstituted solution in the refrigerator (2–8°C) and use within 24 hours (preferably immediately after dilution).
    • ✔ Dilution depends on the dosage and injection area – different zones require different concentrations.

 

📌 Botox Dilution – Standard Protocol

1. Dilution Ratio (Units per Milliliter)

Volume of Diluent

Concentration (Units/0.1 mL)

1 mL saline

10 units

2 mL saline

5 units

2.5 mL saline

4 units

4 mL saline

2.5 units

Example: If a vial contains 100 units of botulinum toxin, the dilution will be:

1 mL saline = 100 U/mL

2.5 mL saline = 40 U/mL

4 mL saline = 25 U/mL


2. Step-by-Step Dilution Process

  1. Prepare sterile 0.9% sodium chloride (saline solution).
  2. Slowly inject the solution through the vial’s rubber stopper along the inner wall (DO NOT shake!).
  3. Let it sit for 1–2 minutes for full dissolution.
  4. Draw the solution into a syringe – ready for use.

📌 Botox Dilution by Brand

Product

Saline Volume (per 100 U)

Concentration (U/0.1 mL)

Botox (Allergan)

2.5 mL

4 U/0.1 mL

Dysport

2.5 mL

10 U/0.1 mL

Nabota (Daewoong)

2.5 mL

4 U/0.1 mL

Botulax

2.5 mL

4 U/0.1 mL

Neuronox

2.5 mL

4 U/0.1 mL

Dysport is diluted differently:
It is diluted more (typically, 2.5 mL of saline results in 10 U/0.1 mL, which is equivalent to 4 U/0.1 mL of Botox/Nabota).

📌 How much Botox to inject in different areas?

Area

Number of Units (for the entire area)

Forehead

8–20 U

Glabella (between the eyebrows)

10–25 U

Crow’s feet

6–15 U

Brow lift

4–8 U

Nostrils (lateral contraction)

2–6 U

Masseter muscles (bruxism, V-line)

25–50 U

Chin (orange peel)

4–8 U

Neck (Venus rings)

20–50 U

Armpits (hyperhidrosis)

50–100 U

⚠️ Dosage may vary depending on the individual characteristics of the patient!

📌 Important Recommendations

Needles – 30G 0.3 mm for precise injections.

Injection depth – depends on the area (superficial for wrinkles, deeper for masseter muscles).

Onset of action – the effect appears within 3–7 days, with the maximum effect seen after 2 weeks.

Side effects – possible swelling, bruising, and asymmetry with improper injection.

📌 Conclusion: Botox dilution depends on the brand, area of application, and desired concentration. If you have a specific product, I can provide the exact dilution protocol for it. 😊

La dilución del toxina botulínica depende de la marca, el propósito de uso y la concentración.
Aquí están los principios generales y las pautas de dilución para los productos populares.

📌 Reglas clave para la dilución del Botox

    • ✔ Utilice una solución salina estéril al 0,9% (cloruro de sodio).
    • ✔ ¡No agite el frasco! – Inyecte suavemente la solución a lo largo de la pared del frasco.
    • ✔ Almacene la solución reconstituida en el refrigerador (2–8°C) y úsela dentro de las 24 horas (preferiblemente inmediatamente después de la dilución).
    • ✔ La dilución depende de la dosis y el área de inyección: diferentes zonas requieren diferentes concentraciones.

📌 Dilución de Botox – Protocolo estándar

1. Proporción de dilución (unidades por mililitro)

Volumen del diluyente

Concentración (unidades/0,1 mL)

1 mL de solución salina

10 unidades

2 mL de solución salina

5 unidades

2,5 mL de solución salina

4 unidades

4 mL de solución salina

2,5 unidades

Ejemplo: Si un frasco contiene 100 unidades de toxina botulínica, la dilución será:

  • 1 mL de solución salina = 100 U/mL
  • 2,5 mL de solución salina = 40 U/mL
  • 4 mL de solución salina = 25 U/mL

2. Proceso paso a paso de dilución

  1. Preparar cloruro de sodio estéril al 0,9% (solución salina).
  2. Inyectar lentamente la solución a través del tapón de goma del frasco a lo largo de la pared interna (¡NO agitar!).
  3. Dejar reposar durante 1–2 minutos para una disolución completa.
  4. Extraer la solución en una jeringa – lista para su uso.

📌 Dilución de Botox por marca

Producto

Volumen de solución salina (por 100 U)

Concentración (U/0,1 mL)

Botox (Allergan)

2,5 mL

4 U/0,1 mL

Dysport

2,5 mL

10 U/0,1 mL

Nabota (Daewoong)

2,5 mL

4 U/0,1 mL

Botulax

2,5 mL

4 U/0,1 mL

Neuronox

2,5 mL

4 U/0,1 mL

Dysport se diluye de manera diferente:
Se diluye más (generalmente, 2,5 mL de solución salina dan 10 U/0,1 mL, lo que equivale a 4 U/0,1 mL de Botox/Nabota).

📌 ¿Cuánto Botox inyectar en diferentes áreas?

Área

Número de unidades (para toda el área)

Frente

8–20 U

Glabela (entre las cejas)

10–25 U

Patas de gallo

6–15 U

Elevación de cejas

4–8 U

Fosas nasales (contracción lateral)

2–6 U

Músculos maseteros (bruxismo, línea V)

25–50 U

Mentón (piel de naranja)

4–8 U

Cuello (anillos de Venus)

20–50 U

Axilas (hiperhidrosis)

50–100 U

⚠️ ¡La dosis puede variar dependiendo de las características individuales del paciente!

📌 Recomendaciones importantes

Agujas – 30G 0,3 mm para inyecciones precisas.

Profundidad de inyección – depende del área (superficial para arrugas, más profunda para los músculos maseteros).

Inicio de acción – el efecto aparece entre 3–7 días, con el efecto máximo visible después de 2 semanas.

Efectos secundarios – posible hinchazón, moretones y asimetría con una inyección incorrecta.

📌 Conclusión: La dilución de Botox depende de la marca, el área de aplicación y la concentración deseada. Si tienes un producto específico, puedo proporcionarte el protocolo de dilución exacto para él. 😊

De verdunning van botuline toxine hangt af van het merk, het gebruiksdoel en de concentratie.
Hier zijn de algemene principes en verdunningsrichtlijnen voor populaire producten.

📌 Belangrijke regels voor Botox-verdunning

    • ✔ Gebruik steriele 0,9% zoutoplossing (natriumchloride).
    • ✔ Schud de flacon niet! – Injecteer de oplossing voorzichtig langs de wand van de flacon.
    • ✔ Bewaar de gereconstitueerde oplossing in de koelkast (2–8°C) en gebruik deze binnen 24 uur (bij voorkeur onmiddellijk na verdunning).
    • ✔ Verdunning hangt af van de dosering en het injectiegebied – verschillende zones vereisen verschillende concentraties.

📌 Botox-verdunning – Standaardprotocol

1. Verdunningsverhouding (Eenheden per milliliter)

Volume van het verdunningsmiddel

Concentratie (Eenheden/0,1 mL)

1 mL zoutoplossing

10 eenheden

2 mL zoutoplossing

5 eenheden

2,5 mL zoutoplossing

4 eenheden

4 mL zoutoplossing

2,5 eenheden

Voorbeeld: Als een flacon 100 eenheden botuline toxine bevat, zal de verdunning zijn:

  • 1 mL zoutoplossing = 100 U/mL
  • 2,5 mL zoutoplossing = 40 U/mL
  • 4 mL zoutoplossing = 25 U/mL

2. Stap-voor-stap verdunningsproces

  1. Bereid steriele 0,9% natriumchloride (zoutoplossing) voor.
  2. Injecteer de oplossing langzaam door de rubberen stopper van de flacon langs de binnenwand (NIET schudden!).
  3. Laat het 1–2 minuten zitten voor volledige oplossing.
  4. Trek de oplossing in een spuit – klaar voor gebruik.

📌 Botox-verdunning per merk

Product

Zoutoplossing volume (per 100 U)

Concentratie (U/0,1 mL)

Botox (Allergan)

2,5 mL

4 U/0,1 mL

Dysport

2,5 mL

10 U/0,1 mL

Nabota (Daewoong)

2,5 mL

4 U/0,1 mL

Botulax

2,5 mL

4 U/0,1 mL

Neuronox

2,5 mL

4 U/0,1 mL

Dysport wordt anders verdund:
Het wordt meer verdund (meestal resulteert 2,5 mL zoutoplossing in 10 U/0,1 mL, wat gelijk is aan 4 U/0,1 mL van Botox/Nabota).

📌 Hoeveel Botox in verschillende gebieden injecteren?

Gebied

Aantal eenheden (voor het gehele gebied)

Voorhoofd

8–20 U

Glabella (tussen de wenkbrauwen)

10–25 U

Kraaienpootjes

6–15 U

Wenkbrauwlift

4–8 U

Neusgaten (laterale samentrekking)

2–6 U

Massaeter spieren (bruxisme, V-lijn)

25–50 U

Kin (sinaasappelschil)

4–8 U

Hals (Venusringen)

20–50 U

Oksels (hyperhidrose)

50–100 U

⚠️ De dosering kan variëren afhankelijk van de individuele kenmerken van de patiënt!

📌 Belangrijke Aanbevelingen

Naalden – 30G 0,3 mm voor precieze injecties.

Injectiediepte – afhankelijk van het gebied (oppervlakkig voor rimpels, dieper voor de massaeter spieren).

Werkingsduur – het effect verschijnt binnen 3–7 dagen, met het maximale effect na 2 weken.

Bijwerkingen – mogelijke zwelling, blauwe plekken en asymmetrie bij onjuiste injectie.

📌 Conclusie: De verdunning van Botox hangt af van het merk, het toepassingsgebied en de gewenste concentratie. Als je een specifiek product hebt, kan ik het exacte verdunningsprotocol voor dat product geven. 😊

WhatsApp